Although sorafenib is the first-line therapeutic agent for advanced hepatocellular carcinoma (HCC), the development of drug resistance in HCC cells limits its clinical efficacy. However, the key factors involved in mediating the sorafenib resistance of HCC cells and the underlying mechanisms have not been elucidated. In this study, we generated sorafenib-resistant HCC cell lines, and our data demonstrate that HLA-F locus-adjacent transcript 10 (FAT10), a ubiquitin-like protein, is markedly upregulated in sorafenib-resistant HCC cells and that reducing the expression of FAT10 in sorafenib-resistant HCC cells increases sensitivity to sorafenib. Mechanistically, FAT10 stabilizes the expression of the PTEN-specific E3 ubiquitin ligase NEDD4 that causes downregulation of PTEN, thereby inducing AKT-mediated autophagy and promoting the resistance of HCC cells to sorafenib. Moreover, we screened the small molecule Compound 7695-0983, which increases the sensitivity of sorafenib-resistant HCC cells to sorafenib by inhibiting the expression of FAT10 to inhibit NEDD4-PTEN/AKT axis-mediated autophagy. Collectively, our preclinical findings identify FAT10 as a key factor in the sorafenib resistance of HCC cells and elucidate its underlying mechanism. This study provides new mechanistic insight for the exploitation of novel sorafenib-based tyrosine kinase inhibitor (TKI)-targeted drugs for treating advanced HCC.
Bioinspired micropillar adhesives have shown broad application prospects in space capture and docking, due to their strong adhesion, good environmental adaptability, and reusability. However, when performing space missions, unavoidable contact collision with target objects may cause large deformation of the micropillars, resulting in the loss of adhesion ability. This study reports a novel micropillar adhesive through the in-plane combination of micropillars (IPCM) with different aspect ratios, consisting of small pillars for retaining strong adhesion and large ones for resisting overload-induced adhesion failure. It is demonstrated that the IPCM array can still maintain 85% of the adhesion peak after static large deformation compared to a general micropillar array composed of the same pillars. The impact of element size and layout of the IPCM, as well as detachment velocity on adhesion performance under high preload is discussed. Furthermore, finite element contact analysis qualitatively reproduces the experimentally observed micropillar deformations and attributes the overload-induced adhesion failure to the redistribution of surface normal stress. Finally, the potential application of the IPCM in dynamic capture is demonstrated on different objects. The proposed IPCM opens up new design concepts for practical applications of bioinspired adhesives in space capture and docking.
The pursuit of fabricating high-performance graphene films has aroused considerable attention due to their potential for practical applications. However, developing both stretchable and tough graphene films remains a formidable challenge. To address this issue, we herein introduce mechanical bond to comprehensively improve the mechanical properties of graphene films, utilizing [2]rotaxane as the bridging unit. Under external force, the [2]rotaxane cross-link undergoes intramolecular motion, releasing hidden chain and increasing the interlayer slip distance between graphene nanosheets. Compared with graphene films without [2]rotaxane cross-linking, the presence of mechanical bond not only boosted the strength of graphene films (247.3 vs 74.8 MPa) but also markedly promoted the tensile strain (23.6 vs 10.2%) and toughness (23.9 vs 4.0 MJ/m3). Notably, the achieved tensile strain sets a record high and the toughness surpasses most reported results, rendering the graphene films suitable for applications as flexible electrodes. Even when the films were stretched within a 20% strain and repeatedly bent vertically, the light-emitting diodes maintained an on-state with little changes in brightness. Additionally, the film electrodes effectively actuated mechanical joints, enabling uninterrupted grasping movements. Therefore, the study holds promise for expanding the application of graphene films and simultaneously inspiring the development of other high-performance two-dimensional films.
The settling of microplastics (MPs) in the initial acceleration fall stage, i.e., before reaching the terminal settling velocity, has not been investigated, which is however important for understanding MP transport and fate. MP disks sized 3-5 mm, of three shapes and made of three polymers (1.038-1.343 g/cm3) were examined. Five release ways and three release angles (0°, 45°, 90°) were used. MP disks with the release angle of 0° start to zigzag immediately after the release, while the MP disks with the release angles of 45° and 90° first adjust to a horizontal position and then zigzag. The adjustment distances in the vertical and horizontal directions, as well as the maximum vertical settling velocity, are influenced by MP density, size, release angle and release way. The detailed settling trajectory and velocity were also analyzed. Finally, the time-changing drag coefficient of MP disks was examined and discussed.
Microplastics , Water Pollutants, Chemical , Water Pollutants, Chemical/analysis , Environmental Monitoring
ß-Carotene is an orange fat-soluble compound, which has been widely used in fields such as food, medicine and cosmetics owing to its anticancer, antioxidant and cardiovascular disease prevention properties. Currently, natural ß-carotene is mainly extracted from plants and algae, which cannot meet the growing market demand, while chemical synthesis of ß-carotene cannot satisfy the pursuit for natural products of consumers. The ß-carotene production through microbial fermentation has become a promising alternative owing to its high efficiency and environmental friendliness. With the rapid development of synthetic biology and in-depth study on the synthesis pathway of ß-carotene, microbial fermentation has shown promising applications in the ß-carotene synthesis. Accordingly, this review aims to summarize the research progress and strategies of natural carotenoid producing strain and metabolic engineering strategies in the heterologous synthesis of ß-carotene by engineered microorganisms. Moreover, it also summarizes the adoption of inexpensive carbon sources to synthesize ß-carotene as well as proposes new strategies that can further improve the ß-carotene production.
Biological Products , beta Carotene , Fermentation , Carotenoids , Antioxidants
Soft material-based robots, known for their safety and compliance, are expected to play an irreplaceable role in human-robot collaboration. However, this expectation is far from real industrial applications due to their complex programmability and poor motion precision, brought by the super elasticity and large hysteresis of soft materials. Here, a soft collaborative robot (Soft Co-bot) with intuitive and easy programming by contact-based drag teaching, and also with exceptional motion repeatability (< 0.30% of body length) and ultra-low hysteresis (< 2.0%) is reported. Such an unprecedented capability is achieved by a biomimetic antagonistic design within a pneumatic soft robot, in which cables are threaded to servo motors through tension sensors to form a self-sensing system, thus providing both precise actuation and dragging-aware collaboration. Hence, the Soft Co-bots can be first taught by human drag and then precisely repeat various tasks on their own, such as electronics assembling, machine tool installation, etc. The proposed Soft Co-bots exhibit a high potential for safe and intuitive human-robot collaboration in unstructured environments, promoting the immediate practical application of soft robots.
Bismuth-based materials have been recognized as the appealing anodes for potassium-ion batteries (PIBs) due to their high theoretical capacity. However, the kinetics sluggishness and capacity decline induced by the structure distortion predominately retard their further development. Here, a heterostructure of polyaniline intercalated Bi2O2CO3/MXene (BOC-PA/MXene) hybrids is reported via simple self-assembly strategy. The ingenious design of heterointerface-rich architecture motivates significantly the interior self-built-in electric field (IEF) and high-density electron flow, thus accelerating the charge transfer and boosting ion diffusion. As a result, the hybrids realize a high reversible specific capacity, satisfying rate capability as well as long-term cycling stability. The in/ex situ characterizations further elucidate the stepwise intercalation-conversion-alloying reaction mechanism of BOC-PA/MXene. More encouragingly, the full cell investigation further highlights its competitive merits for practical application in further PIBs. The present work not only opens the way to the design of other electrodes with an appropriate working mechanism but also offers inspiration for built-in electric-field engineering toward high-performance energy storage devices.
Background: Hepatocellular carcinoma (HCC) is a highly heterogeneous malignancy with poor overall prognosis. Cuproptosis, a recently proposed mode of copper-dependent cell death, plays a critical role in the malignant progression of various tumors; however, the expression and prognostic value of cuproptosis-related regulatory genes in HCC remain unclear. Methods: Genomic, genetic, and expression profiles of ten key cuproptosis-related regulatory genes were analyzed using The Cancer Genome Atlas Liver Hepatocellular Carcinoma (TCGA-LIHC) dataset and protein expression data from the Human Protein Atlas (HPA) database. Unsupervised clustering of HCC patients based on these ten key cuproptosis-related regulatory genes was used to identify different HCC subtypes and analyze the differences in clinical and immune characteristics among subtypes. Subsequently, univariate Cox and least absolute shrinkage and selection operator (LASSO) Cox analyses were used to establish a cuproptosis-related prognostic signature, and the accuracy of prognostic signature prediction was internally validated by Kaplan-Meier survival analysis and time-dependent receiver operating characteristic curve in TCGA training and testing cohorts. The prognostic signature was externally validated using TCGA-LIHC entire cohort and International Cancer Genome Consortium Liver Cancer (ICGC-LIRI) cohorts. Finally, the expression landscape of cuproptosis-related regulatory genes in prognostic signature was explored by quantitative real-time polymerase chain reaction (qRT-PCR), western blotting and immunohistochemistry (IHC) experiments. Results: Ten cuproptosis-related genes were differentially expressed in normal and HCC tissues. Unsupervised clustering identified two subtypes and HCC patients with these two subtypes had different clinical prognoses and immune characteristics, as well as different degrees of response to immunotherapy. Lipoyltransferase 1 (LIPT1), dihydrolipoamide s-acetyltransferase (DLAT), and cyclin dependent kinase inhibitor 2A (CDKN2A) were selected to construct a prognostic signature, which significantly distinguished HCC patients with different survival periods in the TCGA training and testing cohorts and was well validated in both the TCGA-LIHC entire cohort and ICGC-LIRI cohort. The risk score of the prognostic signature was confirmed to be an independent prognostic factor, and nomograms were generated to effectively predict the probability of HCC patient survival. The qRT-PCR, western blotting and IHC results also revealed a significant imbalance in the expression of these cuproptosis-related genes in HCC. Conclusions: The classification and prognostic signature based on cuproptosis-related regulatory genes helps to explain the heterogeneity of HCC, which may contribute to the individualized treatment of patients with the disease.
Aluminum batteries (ABs) are identified as one of the most promising candidates for the next generation of large-scale energy storage elements because of their efficient three-electron reaction. Compared to ionic electrolytes, aqueous aluminum-ion batteries (AAIBs) are considered safer, less costly, and more environmentally friendly. However, considerable cycling performance is a key issue limiting the development of AAIBs. Stable, efficient, and electrolyte-friendly cathodes are most desirable for AAIBs. Herein, a rod-shaped defect-rich α-MnO2 is designed as a cathode, which is capable to deliver high performance with stable cycling for 180 cycles at 500 mA g-1 and maintains a discharge specific capacity of ≈100 mAh g-1. In addition, the infiltrability simulation is effectively utilized to corroborate the rapid electrochemical reaction brought about by the defective mechanism. With the formation of oxygen vacancies, the dual embedding of protons and metal ions is activated. This work provides a brand-new design for the development and characterization of cathodes for AAIBs.
Harnessing the spontaneous surface instability of pliable substances to create intricate, well-ordered, and on-demand controlled surface patterns holds great potential for advancing applications in optical, electrical, and biological processes. However, the current limitations stem from challenges in modulating multidirectional stress fields and diverse boundary environments. Herein, this work proposes a universal strategy to achieve arbitrarily controllable wrinkle patterns via the spatiotemporal photochemical boundaries. Utilizing constraints and inductive effects of the photochemical boundaries, the multiple coupling relationship is accomplished among the light fields, stress fields, and morphology of wrinkles in photosensitive polyurethane (PSPU) film. Moreover, employing sequential light-irradiation with photomask enables the attainment of a diverse array of controllable patterns, ranging from highly ordered 2D patterns to periodic or intricate designs. The fundamental mechanics of underlying buckling and the formation of surface features are comprehensively elucidated through theoretical stimulation and finite element analysis. The results reveal the evolution laws of wrinkles under photochemical boundaries and represent a new effective toolkit for fabricating intricate and captivating patterns in single-layer films.
Transplantation serves as the cornerstone of treatment for patients with end-stage organ disease. The prevalence of complications, such as allograft rejection, infection, and malignancies, underscores the need to dissect the complex interactions of the immune system at the single-cell level. In this review, we discuss studies using mass cytometry or cytometry by time-of-flight, a cutting-edge technology enabling the characterization of immune populations and cell-to-cell interactions in granular detail. We review the application of mass cytometry in human and experimental animal studies in the context of transplantation, uncovering invaluable contributions of the tool to understanding rejection and other transplant-related complications. We discuss recent innovations that have the potential to streamline and standardize mass cytometry workflows for application to multisite clinical trials. Additionally, we introduce imaging mass cytometry, a technique that couples the power of mass cytometry with spatial context, thereby mapping cellular interactions within tissue microenvironments. The synergistic integration of mass cytometry and imaging mass cytometry data with other omics data sets and high-dimensional data platforms to further define immune dynamics is discussed. In conclusion, mass cytometry technologies, when integrated with other tools and data, shed light on the intricate landscape of the immune response in transplantation. This approach holds significant potential for enhancing patient outcomes by advancing our understanding and facilitating the development of new diagnostics and therapeutics.
As an important cell factory, industrial yeast has been widely used for the production of compounds ranging from bulk chemicals to complex natural products. However, various adverse conditions including toxic products, extreme pH, and hyperosmosis etc., severely restrict microbial growth and metabolic performance, limiting the fermentation efficiency and diminishing its competitiveness. Therefore, enhancing the tolerance and robustness of yeasts is critical to ensure reliable and sustainable production of metabolites in complex industrial production processes. In this review, we provide a comprehensive review of various strategies for improving the tolerance of yeast cells, including random mutagenesis, system metabolic engineering, and material-mediated immobilization cell technology. It is expected that this review will provide a new perspective to realize the response and intelligent regulation of yeast cells to environmental stresses.
Carbonyl or imine-based compounds have received a great deal of attention due to their high specific capacity and designability as cathodes for aqueous rechargeable organo-aluminum batteries. However, the inherent low conductivity and high solubility of carbonyl and imine-based compounds severely affect the cycling stability of aluminum batteries. Therefore, it is urgent to find an organic cathodes material with low solubility and good cycling performance. In this work, dibenzo[a,c]dibenzo[5,6:7,8]quinoxalino[2,3-i]phenazine-10,21-dione (DDQP) were synthesized by simple dehydration condensation to form new imine covalent bonds, which led to the synthesis of imine-conjugated backbone structures with carbonyl, extended π-conjugation planes, and increased active sites, resulting in increased specific capacities. Its storage mechanism with Al(OTF)2+ has also been confirmed. This monovalent ion usually possesses a lower coulombic interaction, which leads to a reduced solubility of DDQP during redox processes and improves its cyclic stability. The specific capacity of DDQP is 252.22 mAh/g at a current density of 400 mA g-1. After cycling, the discharge specific capacity remains at 219 mAh/g. Surprisingly, the conductivity of the battery also is improved by this structure of multiple active sites. And it can be further confirmed by theoretical calculations that the synthesis of DDQP realigns the arrangement of the electron cloud, enhances the electron affinity, and reduces the energy gap. This study provides a new reference for improving the performance of aqueous organic aluminum batteries.
Cell-laden hydrogel fibers/tubules are one of the fundamentals of tissue engineering. They have been proven as a promising method for constructing biomimetic tissues, such as muscle fibers, nerve conduits, tendon and vessels, etc. However, current hydrogel fiber/tubule production methods have limitations in ordered cell arrangements, thus impeding the biomimetic configurations. Acoustic cell patterning is a cell manipulation method that has good biocompatibility, wide tunability, and is contact-free. However, there are few studies on acoustic cell patterning for fiber production, especially on the radial figure cell arrangements, which mimic many native tissue-like cell arrangements. Here, an acoustic cell patterning system that can be used to produce hydrogel fibers/tubules with tunable cell patterns is shown. Cells can be pre-patterned in the liquid hydrogel before being extruded as cross-linked hydrogel fibers/tubules. The radial patterns can be tuned with different complexities based on the acoustic resonances. Cell viability assays after 72 h confirm good cell viability and proliferation. Considering the biocompatibility and reliability, the present method can be further used for a variety of biomimetic fabrications.
Hydrogels , Tissue Scaffolds , Reproducibility of Results , Tissue Engineering/methods , Cell Survival
A dual-salt electrolyte with 5 M Al(OTF)3 and 0.5 M LiOTF is proposed for aqueous aluminum batteries, which can effectively prevent the corrosion caused by the hydrogen evolution reaction. With the addition of LiOTF in the electrolyte, the solvation phenomenon has changed with the coordination mode of Al3+ conversion from an all octahedral structure to a mixed octahedral and tetrahedral structure. This change can reduce the hydrogen bond between water molecules, which will minimize the occurrence of hydrogen evolution reactions. Moreover, the new electrolyte improves the cycle life of the battery. With MnO as the cathode, 2.1 V high charging platform and 1.5 V high discharge platform can be obtained. The electrochemical stability window (ESW) has been improved to 3.8 V. The first cycle capacity is up to 437 mAh g-1, which can be maintained at 103 mAh g-1 after 100 cycles. This work provides solutions for the future development of electrolyte for aqueous aluminum batteries.
To investigate suitable processing methods for improve the flavor while maintaining quality, hellgrammites were subjected to fifteen different processing methods. The samples were tested by sensory evaluation and were analyzed using HS-SPME-GC-MS. The sensory evaluation revealed that five methods for head and chest removal, three wine-fried methods, and three vinegar-roasting methods significantly reduced the levels of hexanal (3129.05 ± 45.77 µg/kg) and heptanal (436.72 ± 7.42 µg/kg), compounds responsible for fishy and earthy flavors, compared to raw samples. The latter two methods exhibited increased aroma flavor. PCA and OPLS-DA analyses suggested that acids, alcohols, and esters played a crucial role in flavor modification. Notably, vinegar-roasting methods demonstrated the highest acid content and had a substantial impact on volatile compounds. Additionally, boiling methods effectively reduced the levels of hazardous compounds, such as toluene and 1,3-Dimethyl-benzene. However, other methods did not exhibit similar efficacy in reducing hazardous compounds. The accumulation of hazardous compounds showed a decreasing trend in the whole insect, head removal, and head and chest removal groups. Moreover, the relative odor activity value consistently identified aldehyde compounds, including hexanal and heptanal, as the main contributors to aroma. Overall, boiling and head and chest removal procedures were suggested as precautionary measures during the initial processing of hellgrammites-based food products. The vinegar-roasting and wine-fried methods could be employed to impart desired flavors, aligning with consumers' preferences. These findings lay the foundation for standardizing processing techniques and ensuring the quality control of products derived from hellgrammites.
D-glucuronic acid is a kind of glucose derivative, which has excellent properties such as anti-oxidation, treatment of liver disease and hyperlipidemia, and has been widely used in medicine, cosmetics, food and other fields. The traditional production methods of D-glucuronic acid mainly include natural extraction and chemical synthesis, which can no longer meet the growing market demand. The production of D-glucuronic acid by biocatalysis has become a promising alternative method because of its high efficiency and environmental friendliness. This review describes different production methods of D-glucuronic acid, including single enzyme catalysis, multi-enzyme cascade, whole cell catalysis and co-culture, as well as the intervention of some special catalysts. In addition, some feasible enzyme engineering strategies are provided, including the application of enzyme immobilized scaffold, enzyme mutation and high-throughput screening, which provide good ideas for the research of D-glucuronic acid biocatalysis.
Engineering , Biocatalysis , Catalysis , Coculture Techniques , Glucuronic Acid
Optical grating devices based on micro/nanostructured functional surfaces are widely employed to precisely manipulate light propagation, which is significant for information technologies, optical data storage, and light sensors. However, the parameters of rigid periodic structures are difficult to tune after manufacturing, which seriously limits their capacity for in situ light manipulation. Here, a novel anti-eavesdropping, anti-damage, and anti-tamper dynamic optical encryption strategy are reported via tunable mechanical composite wrinkle micrograting encryption systems (MCWGES). By mechanically composing multiple in-situ tunable ordered wrinkle gratings, the dynamic keys with large space capacity are generated to obtain encrypted diffraction patterns, which can provide a higher level of security for the encrypted systems. Furthermore, a multiple grating cone diffraction model is proposed to reveal the dynamic optical encryption principle of MCWGES. Optical encryption communication using dynamic keys has the effect of preventing eavesdropping, damage, and tampering. This dynamic encryption method based on optical manipulation of wrinkle grating demonstrates the potential applications of micro/nanostructured functional surfaces in the field of information security.
Carotenoids, as a type of tetraterpene compound, have been widely used in food, medical, and health areas owing to their antioxidant, immune enhancement, and disease risk reduction effects. Rhodosporidium toruloides is a promising oleaginous red yeast that can industrially synthesize carotenoids. In this study, the effects of different light exposure times and intervals on carotenoid production by R. toruloides Z11 were first investigated. Results showed that a higher carotenoid content (1.29 mg/g) can be achieved when R. toruloides Z11 was exposed to light for 12 h per day, which was increased by 1.98 times compared with that of dark cultivation. Transcriptome profiling revealed that light stress could effectively promote the gene expression levels of GGPS1 and AL1 in the carotenoid biosynthesis pathway and phr in the DNA photolysis pathway of R. toruloides. This work will provide a molecular foundation to further improve the production efficiency of carotenoids by genetic engineering.
Basidiomycota , Rhodotorula , Genetic Engineering , Rhodotorula/genetics , Carotenoids/metabolism , Basidiomycota/genetics , Basidiomycota/metabolism
Ferrihydrite acts as a natural reservoir for nutrient elements, organic matter, and coexisting pollutants through adsorption and coprecipitation. However, the degradation of emerging fluoroquinolone antibiotics during the transformation of ferrihydrite coprecipitates, especially those with various dissociated species, remains insufficiently explored. In this study, Enoxacin (ENO), employed as a model antibiotic, was introduced to prepare ferrihydrite-ENO coprecipitates. The influence of coprecipitated ENO on the transformation of the ferrihydrite-ENO coprecipitate was investigated across different pH conditions. The results revealed that ferrihydrite-ENO coprecipitates thermodynamically transformed into more stable goethite and/or hematite under all pH conditions. In neutral and alkaline conditions, ENO promoted the transformation of coprecipitates into goethite while hindering hematite formation. Conversely, under acidic conditions, ENO directly obstructed the transformation of coprecipitates into hematite. Different dissociated species of ENO displayed distinct degradation pathways. The cationic form of ENO exhibited a greater tendency for hydroxylation and defluorination, while the zwitterion form leaned toward piperazine ring oxidation, with limited preference for quinolone ring oxidation. The anionic form of ENO exhibited the fastest degradation rate. It is essential to emphasize that the toxicity of the degradation products was intricately connected to the specific reaction sites and the functional groups they acquired post-oxidation. These findings offer fresh insights into the role of antibiotics in coprecipitation, the transformation of ferrihydrite coprecipitates, and the fate of coexisting antibiotics.
Anti-Bacterial Agents , Enoxacin , Iron Compounds , Ferric Compounds , Minerals , Oxidation-Reduction
